PRV AUDIO 1DF1800H High Pass Crossover Board 1800/2500Hz with Driver Attenuation Brightness Control

PRV Audio crossovers are designed and constructed with special attention to both component quality and mechanical rigidity. Not only do our crossovers sound good, but they can also withstand the use and abuse associated with transportation and live performances.PRV AUDIO HIGH PASS CROSSOVERType: High PassImpedance (Ohms): 8Crossover Point (Hz): 1,800Woofer Impedance (Ohms): -RMS Power (Watts): 150Program Power (Watts): 300Selectable Crossover Point (Hz): 2,500HF Attenuation (dB): 6/9Brightness: YesWoofer Octave Sel (dB octave): -Midrange Attenuation (dB): -Octave (dB): 12

• WOOFER IMPEDANCE SELECTION:This setting allows the same crossover to be used with 8 or 4 Ohms speakers and combinations of them (series or parallel connection) providing you with one solution for multiple cabinet variations.
• WOOFER ROLL-OFF CROSSOVER ADJUSTMENT:Some woofers respond excessively at the cut off frequency than others and need 12 dB/octave filters, where other woofers have a natural roll-off at or near the crossover point, and work well with 6 dB/octave filters. We give you the ability to select this on two of our crossovers: the 2DF1800 two-way crossover and the 3DF400/1800 three-way crossover.
• SPEAKER ATTENUATION: Match the output level of the different speakers in your cabinet with the setting; it helps in creating a seamless transition from high to mid to low-especially useful for when driver sensitivities do not match.
• BRIGHTNESS ADJUSTMENT: Many large format compression drivers naturally roll-off above 10 kHz. Our brightness adjustment offsets this phenomenon , applying attenuation below 6 kHz and increasing the energy at high frequencies for more brightness and definition.